PLACEMAKERS
Opening Hours
Buildings more than 300m2 - Flooring Suppliers
Flooring Insulation Supplier Solutions - Quickset
QuickSet’s patented system is a revolution in foundation design that provides an insulated, internally braced, permanent formwork system for raft foundations, which can exist either as a fully insulated system or as edge insulation alone.
By incorporating the insulation panel within permanent formwork that remains in place after the concrete has been poured, QuickSet has simplified and improved the build process for foundations, as there’s no stripping of formwork or removal of external bracing required.
The formwork is composed of a PVC foam sheet, laminated with extruded polystyrene (XPS) to add further insulation. This tough, dense material has high impact strength, absorbs less than 1% moisture and is self-extinguishing, making it the perfect material for the outside of a foundation.
Suitable for framing that is 90mm, 140mm or more, the QuickSet system is highly adaptable and compatible with all pod systems and meets all requirements under H1 regulations. This tried-and-tested system is ready for the building industry to use and is code marked and BRANZ-appraised with Superslab+ by Allied Concrete.
Solution 1 - Quickset Taper
Taper is suitable for 90mm framing, uses standard hold-down bolts, and has no increased centres or chem set epoxy. It is approved for a 6mm frame overhang.
Solution 2 - Quickset Ultra
Ultra is suitable for 140mm framing.
Solution 3 - Quickset Rebate
Rebate is our solution for bricks; we are the only insulation product to allow insulation under and behind the brick, using a dense product called PVC Foam Board. Rebate needs no flintcote/mulseal.